SEGGER Microcontroller 6.90.00 emPower USB Host Board
Segger 6.90.00 emPower USB Host Board is a low-cost microcontroller-based board that requires a dual USB platform in a simple and small design. This emPower USB host board features a debug connector that provides full access to the NXP LPC54605J512 with Cortex® M4 core. The emPower USB host board is pre-programmed with emLoad bootloader. The USB board can also be debugged using Embebbed Studio, a J-Link and a 9-pin Cortex-M adapter. Applications include input devices, sensors, terminals, loudspeaker, Wi-Fi, LAN, CAN, and Bluetooth.
Features
NXP LPC546 MCU (LPC54605J512) 180MHz, ARM Cortex-M4
180MHz ARM Cortex-M4 based coreFloating Point Unit (FPU) and Memory Protection Unit (MPU)512KB On-chip flash program memory160KB contiguous main SRAM2.0 USB high-speed host/device controller with on-chip high-speed PHY and dedicated DMA9-pin Cortex®-M external debug interface
180MHz ARM Cortex-M4 based coreFloating Point Unit (FPU) and Memory Protection Unit (MPU)512KB On-chip flash program memory160KB contiguous main SRAM2.0 USB high-speed host/device controller with on-chip high-speed PHY and dedicated DMA9-pin Cortex®-M external debug interface
Applications
Input devicesSenorsTerminalsLoudspeakers
Segger Newest
Segger 6.90.00 emPower USB Host Board is a low-cost microcontroller-based dual USB platform used to build a variety of USB based gadgets.
Date: 2019-06-13SEGGER Microcontroller J-Trace Mictor 38 Adapter is used to adapt from a 20-pin 0.05" Cortex trace connector to 38-pin Mictor connector.
Date: 2019-03-28SEGGER Microcontroller iMX RT1050 Trace Reference Board features an ARM Cortex-M7 based microcontroller that supports the Embedded Trace Macrocell (ETM).
Date: 2019-03-20SEGGER Microcontroller WiFi Module for emPower Board Longsys Arrow GT202 is a controller supporting IEEE 802.11b/g/n WiFi networks in a 2.4GHz band.
Date: 2019-03-20SEGGER Microcontroller STM32H7 Trace Reference Board is an ARM Cortex-M7 based microcontroller that supports the Embedded Trace Macrocell (ETM).
Date: 2019-03-20SEGGER Microcontroller Flasher Portable Programming Tool is a stand-alone, in-circuit programming tool for microcontrollers with on-chip and external Flash memory.
Date: 2017-06-05Segger Microcontroller Embedded Studio Software is an all-in-one solution for embedded applications.
Date: 2016-01-12